Builder Extreme 1500 HC
Brand:
Builder
| EAN: | 351001712 |
| Location Code: | 351001712 |
- Premium service and support
- Eenvoudige mogelijkheid voor leasen.
- Gunstige verzendvoorwaarden en retourbeleid
- Fysieke showrooms op diverse locaties in Nederland
- 2-4 Weeks, on request
Information
The Extreme 1500 HC (Heated Chamber) is the latest addition to the Builder Extreme range. With a build volume of 1100x500x820 mm, in combination with a heated chamber, makes it the ideal large scale 3D printer to print material such as PET-G, ABS, ASA, PC, CF15 and more. The extruder has a maximum temperature of 300 degrees Celsius and is water cooled. The heated chamber is heated up to 70 degrees Celsius to make 3D printing of materials like ABS and ASA easier. The filaments are located in a heated cabinet for optimal use. Pre-order for the Extreme 1500 HC is now open, available from Q1 2022.
Technology
FFF (Fused Filament Fabrication)
Print head
Mono print head (3 nozzle diameters included)
Build size
1100x500x820 mm (XYZ)
Layer height resolution
0.4 mm nozzle – 0.2 – 0.3 mm
0.6 mm nozzle – 0.2 – 0.5 mm
0.8 mm nozzle – 0.3 – 0.7 mm
Print speed
Up to 200 mm/s (standard speed 80 mm/s)
Depending on geometry of part and nozzle size
Travel speed
Up to 300 mm/s
Build plate
Heated aluminium plate up to 110°
Bed leveling
Manual bed leveling at installation only
Feeder type
Direct drive
Nozzle diameter
0.4 standard, 0.8 and 1.2 mm are included
Heated Chamber
Up to 70 degrees Celsius
Power rating
3 KW (at peak)
Connectivity
USB, Wi-Fi, Ethernet
Display
7-inch full colour touchscreen
Filament detection
Yes
UPS system
Possibility to resume print after power failure
Safety locking system
Doors open only after print is paused
CE and UL certified
Yes