Het IDEX systeem van de Raise3D E2
De Raise3D E2 is uitgerust met IDEX – Independant Dual Extruders. Hiermee is het mogelijk om verschillende modellen tegelijk te printen en kunnen meerdere studenten in korte tijd een printopdracht uitvoeren. Doordat de extruders onafhankelijk van elkaar werken, kunnen studenten sneller en efficiënter werken.
Kenmerken:
- Duplication mode
- IDEX
- Independant dual extruders (EDEX)
- Mirror mode
- Auto Bed leveing
- Assisted offset calibation
- Safety mode
- Power saving button
- Flexible build plate
De Raise3D E2 is net als de Pro2 en Pro2 Plus aan te sturen via RaiseCloud. Met behulp van de bijgeleverde IdeaMaker software zijn de modellen eenvoudig te slicen.
De Raise3D E2 is verkrijgbaar in 2 varianten:
- Raise3D E2 - Corporate €2.999,- excl. btw
- Raise3D E2 - Educational €2.499,- excl. btw (alleen voor onderwijsinstellingen)
| General |
| Build Volume (W×D×H) |
Single Extruder Print:
13×9.4×9.4 inch / 330×240×240 mm
Dual Extruder Print:
11.6×9.4×9.4 inch / 295×240×240 mm |
| Machine Size (W×D×H) |
23.9×23.5×18.3 inch / 607×596×465 mm |
| Print Technology |
FFF |
| Motion System |
Independent Dual Extruders |
| Filament Diameter |
1.75 mm |
| XYZ Step Size |
0.78125, 0.78125, 0.078125 micron |
| Print Head Travel Speed |
30 – 150 mm/s |
| Build Plate |
Flexible Steel Plate with Buildtak |
| Max Build Plate Temperature |
110 ºC |
| Heated Bed Material |
Silicone |
| Build Plate Leveling |
Mesh-leveling with Flatness Detection |
| Supported Materials |
PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon Fiber / Infused / Metal Fill / Wood Fill |
| Nozzle Diameter |
0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available) |
| Max Nozzle Temperature |
300 ºC |
| Connectivity |
Wi-Fi, LAN, USB port, Live camera |
| Noise emission (Acoustic) |
＜50 dB(A) when building |
| Operating Ambient Temperature |
15-30 ºC, 10-90% RH non-condensing |
| Storage Temperature |
-25℃ to +55℃, 10-90% RH non-condensing |
| Technical Certifications |
CB, CE, FCC, RoHS |
| Filter |
HEPA filter with activated charcoal |
| Electrical |
| Power Supply Input |
100-240 V AC, 50/60 Hz 230 V @2 A |
| Power Supply Output |
24V DC, 350 W |
| Software |
| Slicing Software |
ｉdeaMaker |
| Supported File Types |
STL, OBJ, 3MF |
| Supported OS |
WINDOWS/ macOS/ LINUX |
| Machine Code Type |
GCODE |
| Printer Controller |
| User Interface |
7-inch Touch Screen |
| Network |
Wi-Fi, Ethernet |
| Resume Print after Power Outage |
Firmware recording, no need for battery installation. Protection from any condition. |
| Screen Resolution |
1024*600 |
| Motion Controller |
ARM Cortex M7.400MHZ FPU |
| Logic Controller |
NXP ARM Cortex-A9 Quad 1 GHz1GB |
| Memory |
1GB |
| Onboard Flash |
8GB |
| OS |
Embedded Linux |
| Ports |
USB 2.0*2, Ethernet*1 |
